The Economical miPRO 150 is designed to  work with all Phones. The spring loaded lower  section allows it to work with any phone even with  a case, including the thicker Otterbox or Ballistic  models. To insert, place the phone onto the  supports at the base and press downward, tilt  phone back until captured under top supports.  Additional mount required. (Recommended VSM- G3 or universal mounts) If using with a standard  or Legend style VSM, the TT-39 adapter is  required.

                                    

 Cradle Only (requires G3 style mount)       
  MI-150

   The miPRO 250 is a PremiereUniversal Holder  designed to work perfectly with any VSM-G3  mounting bracket.. The miPRO 250 snaps directly  onto the 17mm ball, eliminating hardware or  adapters. If using with a standard or Legend style  VSM, the TT-39 adapter is required.

                                  

 Holder Only (requires G3 style mount)       
  MI-250

     (Out of Stock) 
The miPRO 450 Docking Station
 for Apple iPhones and the iPod Touch.
 It allows for charging plus it works with most  cases or skins. Designed to fit the VSM-G3  mounts. If using with a standard or Legend style  VSM, the TT-39 adapter is required.
 
                                 

 Dock Only (requires G3 style mount)      
   MI-450

The miniGRIP standard universal Holder is ideal for Smart Phones of nearly any size and fit devices 1 3/4" to 3 1/4" wide, and up to 5 inches tall. The miniGRIP feet are adjustable so charging your phone is possible. Great for small phones or larger ones like the Blackberrys, HTC Thunderbolt, Droid X and any of the iPhones, all with or without a case. Included are an extra set of feet supports.vwith a case or skin cover
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
MI-200

The miCRADLE 4S and iPhone 4 is a holder specifically designed to fit the Apple iPhone. This custom holder is lined with felt for a scratch free, snug fit. The miCRADLE 4 fits with ANY Pro.Fit mount. Not compatible with skins or cases.
Works with iPhone 4 or iPhone 4S

HOLDER (requires vehicle mount)
MI-4BG

The Express Holder is an attractive, super low profile holder perfect for belt clips or cases with belt clips sewn in (up to 1" wide). Included is a belt clip and two adhesive backed buttons for your own unique applications.  Attaches to any mount.

HOLDER (requires vehicle mount)
EM-1224

The miTOUCH 4 is a holder specifically designed to fit the Apple iPod Touch 4th generation. This custom holder is lined with felt for a scratch free, snug fit. The miTOUCH 4 fits with ANY Pro.Fit mount. Not compatible with skins or cases.

HOLDER (requires vehicle mount)
MI-760BG

The miTOUCH is a holder specifically designed to fit the 1st, 2nd and 3rd Generation Apple iPod Touch. All memory sizes are compatible. This custom holder is lined with felt to eliminate scratching and vibration. The miTOUCH fits with any Pro.Fit mount. Not compatible with skins or cases.
HOLDER (requires vehicle mount)
MI-750

The miCRADLE 3G is a holder specifically designed to fit the 8GB and 16GB Apple iPhone 3G or 3Gs. This custom holder is lined with felt for a scratch free, snug fit. The miCRADLE 3G fits with ANY Pro.Fit mount. Not compatible with skins or cases.
To View Pictures of the iPhone 3G Installed, Click HERE

HOLDER (requires vehicle mount)
MI-300

The miCRADLE is a holder specifically designed to fit the original Apple iPhone. This custom holder is lined with felt for a scratch free, snug fit. The miCRADLE fits with ANY Pro.Fit mount. Not compatible with skins or cases.
HOLDER (requires vehicle mount)
MI-600

First Generation 10 GB
Second generation 10, 20 GB
Third Generation 10,15, 20 GB
Fourth Generation 20, 30 GB
(iPod Color, iPod Photo)
Fifth Generation 30, 60, 80 GB
(iPod Video)
Sixth Generation 160 GB
(iPod Classic)

The miMOUNT fits with ANY Pro.Fit mount. Not compatible with skins or cases. $19.95
HOLDER (requires vehicle mount)
MI-100

This custom holder keeps your Blackberry Storm
(I & II) perfectly mounted at your finger tips mile after mile. Its quick release design allows for easy removal. Fits with ANY Pro.Fit mount. Not compatible with skins or cases.
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
MI-800

This adapter plate is produced specifically for the Garmin Nuvi. The adapter attaches directly to any VSM or VSM Legend style mount in addition to any of the Universal Mounts produced by Pro.Fit.
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
TT-39

This adaptor plate is produced specifically for the newer style TomTom GPS Units. Be sure to look at the back of your GPS unit -- if you find a circular mounting pattern, you've got the right piece.
Various older TomTom mounting patterns are listed below.
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
TT-22

This adaptor plate is produced specifically for the older style TomTom One XL GPS units. A low-profile, near invisible mounting solution. Be sure to look at the back of your TomTom to tell whether or not you need a TomTom EasyPort Adaptor plate (listed above) or this!
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
TT-34

This adaptor plate is produced specifically for the older style TomTom GO series GPS units. A low-profile, near invisible mounting solution. Be sure to look at the back of your TomTom to tell whether or not you need a TomTom EasyPort Adaptor plate (listed above), or this piece.
HOLDER (requires Vehicle Mount)
TT-42

This adaptor plate is produced specifically for the older style TomTom Version 2, Version 3 GPS units. A low-profile, near invisible mounting solution. Be sure to look at the back of your TomTom to tell whether or not you need a TomTom EasyPort Adaptor plate, or this piece.
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
TT-35

Produced specifically for Magellan GPS units or any other device with a DUAL T mounting pattern. This adaptor is nearly invisible when mounted and will fit with ANY Pro.Fit mount.
HOLDER (requires vehicle mount)
MG-032

This adaptor plate is produced for the Mio and Navman GPS units. Compatible with ANY Pro.Fit mount.
HOLDER (requires vehicle mount) Includes adapter plate for mounting.
NV-1740

Looking to mount two devices in your vehicle? The Extension Bracket allows you mount two of certain devices to one Vehicle Mount; dimensions measure 4 ¾ inches long and 2 ¼ inches wide. Also works to adjust device location for dashboard clearance.
EX-13-70

Looking to mount two devices in your vehicle? This enhanced Extension Bracket allows you mount two devices to one Vehicle Mount; dimensions measure 4 ¾ inches long and 2 ¼ inches wide. Also works to adjust device location for dashboard clearance. 
EX-202

The T-AMPS Adaptor Plate was produced specifically for satellite radios and any other device using a T-Slot mounting pattern. Fits with ANY Pro.Fit mount.
HOLDER (requires vehicle mount)
TS-01